Use pry bar to remove damaged pieces of flooring and vacuum any
debris left over from the removal process.
Step 2. Put Vapor Barrier
in Place
Cut vapor barrier to size and staple into place using a staple
gun. Use a hammer to flatten staples into place.
Step 3. Nail Boards Into
Place
Face-nail each board
into place. After all the boards are nailed, use wood putty to cover each nail.
Step 4. Sand the Boards
Sand the boards with
an orbital sander in preparation for the stain.
Step 5. Stain the Wood
Stain the wood using a
rag and wood stain appropriate for the type of wood used in the flooring.
No comments:
Post a Comment